Global Analytical Gas Systems
Balston客户服务平台，主要为注册客户提供技术援助，方案规划，产品选型，故障分析及排除等服务。注册客户，需要填写必要的公司信息及联系方式，以便我们更好的、更及时的服务于您。客户咨询电话：186 1118 5945
Global Analytical Gas Systems
Parker Balston-Cabinet Dryers 派克Balston压缩空气干燥器常见问题
返回空气干燥器主页
点击阅读下面的任何问题的答案，了解更多信息! Click any of the questions below to read the answers and learn more!
- 如何安装我的干燥机 ？How should I mount the dryer?
- 如何保持NEMA型4X等级的壳体 ？How do we maintain the NEMA type 4x rating of the enclosure?
- 我应该使用什么尺寸规格的管子？What size tubing should I use?
- 干燥器出来的压力是多少 ？What is the pressure coming out of the dryer?
- Won't pressure build up inside my cabinet?
- 我希望在我的过滤设备管线上安装排水装置，我选什么样的螺纹合适呢？ I want to connect a drain line to the filter drain.What size fitting do I need?
- 我们需要为每个干燥器配备机柜 ？ Do I need one dryer per cabinet?
- Once inside the cabinet, what is the ideal location for the end of the tubing?
- 您应该多久更换一次前置过滤滤芯 ？ How often should I change the prefilter?
- 您应该如何为系统设备排水 ？How do I check the operation of the drain?
- 我的客户要求使用干燥器的气体应用在气动阀和气缸上，我们可以把干燥器使用在气动设备上？ My customer has air going to his cabinets to operate pneumatic valves and cylinders inside the cabinet. Can I use the cabinet dryer for operating the pneumatics?
- 我们非常小心的使用工厂的压缩空气，本机不会浪费大量的压缩空气？We are really careful about use of compressed air in the plant. Won't this dryer waste a lot of air?
- 我有一个细长型的干燥器，用什么方式来清洁干燥器I've got a long thin cabinet. What is the best way to purge this cabinet?
Q: How should I mount the dryer?
A: The dryer should be mounted vertically on a surface near the enclosure. Use no. 8 hardware to securely fasten it to the surface.
Q: How do we maintain the NEMA type 4x rating of the enclosure?
A: Use the supplied strain relief bushing, properly installed by a qualified person to connect the dry air line from the dryer to the enclosure interior.
Q: What size tubing should I use?
A: 1/4" OD tubing is recommended for use with the supplied strain relief bushing.
Q: What is the pressure coming out of the dryer?
A: As long as the line downstream of the dryer is open, the pressure will be near atmospheric.
Q: Won't pressure build up inside my cabinet?
A: No the cabinet is connected to electrical conduit which is open to atmosphere at the circuit box so there is no chance of pressure build up.
Q: I want to connect a drain line to the filter drain. What size fitting do I need?
A: The prefilter is supplied with a 1/8 barb fitting.
Q: Do I need one dryer per cabinet?
A: Ideally each cabinet should have a dedicated dryer. If the cabinets are close to each other, a separate line may be run to each. Assure that the lines are approximately the same diameter and length to balance the flow. Also assure that the total volume of the cabinets matches the specified rating for the dryer. If the cabinet is greater than 36 cubic feet, multiple dryers may be used.
Q: Once inside the cabinet, what is the ideal location for the end of the tubing?
A: Position the tubing so the outlet is pointed down along the side or sideways along the bottom of the box. Do not direct the air directly toward electrical components.
Q: How often should I change the prefilter?
A: The prefilter should be replaced every six months to one year depending on the quality of the compressed air. The operation of the auto drain should be checked at that time.
Q: How do I check the operation of the drain?
A: During scheduled maintenance, unscrew the manual drain a few turns and assure that it is not clogged.
Q: My customer has air going to his cabinets to operate pneumatic valves and cylinders inside the cabinet. Can I use the cabinet dryer for operating the pneumatics?
A: The dryers have a built in flow control orifice. This orifice places a large restriction on the flow of air to the pneumatics. Contact David Connaughton if you have this need.
Q: We are really careful about use of compressed air in the plant. Won't this dryer waste a lot of air?
A: The cost of lost down time far exceeds the cost of compressed air. At $0.07/kwh the CD0005 costs $0.15/day, the CD0010 costs $0.30/day and the CD0030 costs $0.90/day. Compare that to the cost of an hour's worth of lost production.
Q: I've got a long thin cabinet. What is the best way to purge this cabinet?
A: The best way to purge a large or oddly shaped cabinet is to place the dryer so that the line enters the cabinet at the furthest point from the conduit where the air exits. Once the line is inside the cabinet, branches are possible from the incoming line. It is best to keep these branches of equal length to help balance the flow, even if one branch needs to be coiled up to accommodate its length.
返回页面顶端
产品目录 Product Literature